Jasion Ebike Kickstand Replacement Guide

Quick answer

You can replace your Jasion ebike kickstand in about 15 minutes with basic tools. Focus on matching the mounting bracket and adjusting the stand length to keep your bike stable.

Step-by-step replacement

1. Remove the old kickstand: Place your bike on a stable surface. Use a hex key or wrench to unscrew the bolt(s) holding the old stand to the frame bracket. Slide the stand off and set it aside. Common mistake: Forgetting to support the bike while the stand is off – use a block or have someone hold it upright.
2. Prepare the new kickstand: Check the new stand's length against your old one. Adjust it if possible by loosening the adjustment screw, extending or retracting the leg, and retightening. The E-Bike Kickstand is designed for easy adjustment. Checkpoint: The stand should be slightly longer than needed so the bike leans just a few degrees – too long and it won't fold properly.
3. Install the new kickstand: Align the new stand's mounting bracket with the frame plate. Insert the bolt and tighten it firmly but not overly. Test the stand by gently rocking the bike – it should hold steady without wobbling. Common mistake: Overtightening can strip the bolt or crack the bracket. Use hand-tight plus a quarter turn with a tool.
4. Test and adjust: Park the bike on level ground and deploy the stand. The bike should stay balanced with both wheels touching the ground. If it leans too much, shorten the leg slightly; if it's too upright, lengthen it. Checkpoint: Always test on a slight incline – the stand must hold the bike from rolling.

Product facts

• E-Bike Kickstand: The E-Bike Kickstand is built with durable construction for reliable support and everyday convenience. It keeps your bike balanced while parked, reducing the risk of falls during stops or storage.